EverFocus EBC890 Instrukcja Użytkownika Strona 55

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 64
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 54
47
4747
47
Note the time out duration of alarm output can be different for each individual alarm
and they can be set from the flex software, not from controller.
Address Setting
Each device connected to the same RS485 bus must have a unique address for the purpose of
communications and control. When multiple controllers connect to PC via an RS485 bus, each
controller must be assigned a distinct address. Procedures to set controller address are as
follows:
Under System menu, press five times to bring up the following window:
Press to enter Address Setting menu, as shown below:
Use numeric keys to enter desired address in the range 0000~9999. Press to confirm.
Press to clear the address field and exit without effecting any change.
ARM / DISARM
The EBC890 controller defines 4 arm zones for its 4 alarm inputs, and can treat alarm inputs in
a very flexible manner. These 4 arm zones can be armed or disarmed on the controller globally
as described below. Also the individual arm zone can be activated or de-activated from section
“Set Active Arm Zone Setting”.
Arm / Disarm the System using the Controller Keypad
User must be an ARM-capable user and have the ARM PIN in order to perform this function.
Please refer to the section Set Arm P” in this chapter for instructions on how to set ARM PIN.
Follow the below steps to arm/disarm the system:
Step 1: After system installation, the date and time information will be displayed on the LCD, as
shown below:
When on the keypad is pressed, the system prompts the user to enter a password, as
shown below:
20
2020
2009
0909
09-
--
-0
00
09
99
9-
--
-23 TUE 08:30
23 TUE 08:3023 TUE 08:30
23 TUE 08:30
Welcome!
Welcome! Welcome!
Welcome!
Address:
Address:Address:
Address:
0000
00000000
0000
Address Setting
Address SettingAddress Setting
Address Setting
Przeglądanie stron 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag