EverFocus EBC890 Instrukcja Użytkownika Strona 29
- Strona / 64
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
21
2121
21
Connecting Power
Connecting the Power Supply
Connect the positive end to the terminal 47 and the GND to terminal 48 as shown in
Fig. 24.
Fig. 24. Connecting the Power Supply
The power supply for fingerprint controller should range in DC 12V±15%. The minimum
output of power supply should be no less than 1.5A.
Important Tips: The voltage supply should be located no more than 2 meters/7 feet from the
controller. Also, electric locks and alarm devices MUST be powered separately.
Reset Controller
Before turning the power on, please double check to ensure that all the wiring and connections
are correct. In order to restore factory default settings, switch the power on while holding
down the RESET switch. The RESET switch is shown in
Fig. 25.
Fig. 25. Reset Controller
Important Note: Doing reset will erase all data, settings.
Chapter
5
Reset
37
38
41
40
39
42
43
44
47
46
45
48
V+ V
-
- User Manual 1
- Read This First 3
- Safety Warning 3
- Table of Contents 4
- Chapter 8 7
- Specifications 8
- Product Overview 9
- Parts List 10
- Controller Layout 11
- Terminal Definition 12
- Installation Overview 14
- EverAccess 16
- Hardware Installation 18
- Connection to Door Lock 19
- Connection to Alarm Input 21
- Connection to Door Sensor 21
- Connection to Alarm Output 22
- Connection to Fire Alarm 23
- Connection to Door Bell 23
- Connecting Fingerprint 24
- Controller and Computer 24
- Main module 25
- RS485 Bus Extension 26
- TCP/IP Based System 28
- Connecting Power 29
- Before First Use 30
- Fingerprint Capture 31
- Maintenance 32
- Controller Functionality and 33
- Configuration 33
- Enter System Configuration 34
- Verify System PIN 34
- System Setting 35
- Enter System Setting Menu 36
- Set Date Format 36
- Set Date 36
- Set Time 37
- Auto Daylight Savings Time 37
- Set System Password 37
- Set Arm Password 38
- Set Wiegand Output Format 38
- Set Language 38
- Set Time Server Setting 39
- System Info 39
- User Setting 40
- Add User 41
- Delete Users 42
- Set User Properties 43
- Door Setting 46
- Door Access Mode Setting 47
- Open Time Setting 48
- Set Door Hold Open Time 48
- Alarm Setting 49
- Enter Alarm Setting Menu 50
- Fire Alarm 50
- SYS PIN Fail 50
- ARM PIN Fail 51
- Remote Alarm 51
- Unknown User 51
- Expired User 51
- Invalid Time 52
- User PIN Fail 52
- Door Forced Open 52
- Door Held Open 52
- Zone Alarm 1~4 52
- Arm Zone Setting 53
- Set ARM Delay Time 54
- Alarm Output Mode 54
- Address Setting 55
- ARM / DISARM 55
- Reset the Alarm 56
- Software Setup 58
- Schedule 60
- Enroll Card Holders 60
Samsung SRN-4000 manuales
Manuales del propietario y guías del usuario para Redes Samsung SRN-4000.
Ofrecemos 2 manuales en pdf Samsung SRN-4000 para descargar gratis por tipos de documentos: Manual de usuario
Komentarze do niniejszej Instrukcji