EverFocus ENR 400 Instrukcja Instalacji Pobierz pdf (Strona 60)

ENR 400 Installation Manual

60 of 81 ENR400_ma_inst_en_rev01

Define Object Size

Define the estimated object size by drawing in the video window.

If necessary, the object size has to be adjusted again after running

simulation (in case of no safe detection).

Options

1 Way Counting: Application will count movements from REGION 1 to

REGION 2 only.

2 Way Counting: Application counts movements in both directions

Sensitivity: Adjust the detection sensitivity depending on the

scenery. Use the simulation mode for test. This

setting is also related to OBJECT SIZE setting.

Runtime

Options for live - display:

Show Counting

Result

The number of counted movements is shown as overlay in the live

view of the camera.

Show Object Bounding

Box

Counted objects are marked in live view of the camera.

Reset every....

Time interval for resetting the counting result display in the camera.

Start / Stop Simulation

After setting the parameters the settings can be tested in simulation

mode. Counting results are shown under RESULT in lower right

corner.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 80 81

Brak uwag

EverFocus ENR 400 Instrukcja Instalacji Strona 60