EverFocus ENR 400 Instrukcja Instalacji Pobierz pdf (Strona 31)

ENR 400 Installation Manual

31 of 81 ENR400_ma_inst_en_rev01

Run Playback on Monitor

Selection of monitor output 1 or 2 for playback window

Primary / Secondary

Use the arrow buttons in the middle to add / remove cameras from the list

of selected monitor. Removed cameras will not be displayed at this

monitor.

Auto scan

Primary channel

"Not used" will scan all channels, which are assigned to primary monitor

in order. If a channel is selected, this channel will be displayed every

second step.

Example: "Primary Channel: Ch. 3":

Sequence: 1 > 3 > 2 > 3 > 4 > 3 > 5 > 3 > 6......

Secondary channel

"Not used" will scan all channels, which are assigned to secondary

monitor in order. If a channel is selected, this channel will be displayed

every second step.

Example: "Primary Channel: Ch. 3":

Sequence: 1 > 3 > 2 > 3 > 4 > 3 > 5 > 3 > 6......

Auto scan interval

Dwell time for interval switching in seconds

Layout

NxN type

Layout for the free definable multiview "N": 4x4, 5x5 or 6x6

Popup camera on

Event

If checkbox is active, cameras will switch to full screen in case of live

events.

Note: If secondary monitor is used, make sure to enable this monitor under > START > ENABLE SECONDARY

DISPLAY

5.4.9 Setting - Joystick

The ENR series supports EKB-200 joysticks and other HID compatible USB Joysticks.

If the system detected a joystick, ENR will show the setup options under the tab JOYSTICK.

Without connected joystick the options are greyed and not active.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 80 81

Brak uwag

EverFocus ENR 400 Instrukcja Instalacji Strona 31