EverFocus ENVR8304E Instrukcja Użytkownika Strona 103

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 177
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 102
ENVR8304D-8CH / ENVR8304E-8CH
94
The total capacity of a RAID 5 array is the size of the smallest disk times (N-1) disks. For
example, a RAID 5 volume with three 200 GB disks and one 100 GB disk will have a total
capacity of 300 GB. {100 GB x (4-1) = 300 GB}.
RAID State: Shows the RAID and disk state. (No RAID, Broken, Degrade, Rebuilding, Normal,
EzBackup, Unknown, or System Error, No RAID Now. If connecting to more than one disk, it
will show Disk1, Disk2 …DiskX is ok.)
To enable the RAID 5 function, follow the steps below:
1. Select RAID 5, the following message appears. Click Yes to configure the RAID settings.
And the NVR will automatically reboot.
Figure 6-37
2. Enter the RAID menu again, the RAID 5 is enabled.
Przeglądanie stron 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 176 177

Komentarze do niniejszej Instrukcji

Brak uwag