EverFocus EPN4122 Instrukcja Użytkownika Pobierz pdf (Strona 2)

NVR Device Pack Release Note

NUUO version 2.6.0

2 / 38

Zavio

Digital WatchDog

TCIP-D220DN, TCIP-D230WDRDN, TCIP-LD213WDRMDN, TCIP-LD220MDN,

TCIP-LD230WDRMDN and TCIP-LPro213WDRMDN (Mini2 and Titan support,

Mainconsole already support on DP v2.5)

D5113, D7111, F1100 and F1105

DWC-MPA20M

Notice:

1. Known issue:

a. Sunell SN-IPD54/12VDN, VSR54/01 autodetect fail due to camera FW issue.

IPS54/70DN/ZR18 VSR54/01 changing MJPEG resolution may get Fail message due to

camera FW issue. Can’t support G711 A-law(Onvif issue)

b. Axis P7224 can’t use second audio in (All). Support G.711 only (mini2/Titan).

c. Forenix NPB-720BM doesn’t support On-edge motion under TCP or UDP protocol.

d. Digital WatchDog DWC-MPA20M does not support On-edge motion detection.

e. Digital WatchDog DWC-MPA20M, if switching between profiles constantly(about 5~10

times), sometimes the camera is just disconnected and no longer connected again until

rebooting it

f. 2.5 and 12.5 framerate can’t be show at EPN4122.

Bug fixed:

Mainconsole:

- Can’t connect over 3 Pelco IP110 devices.

- Icantek icanview240 can’t use PTZ.

- Probe connection failed after several minute.

- EverFocus ONVIF camera responses LAN address in NAT environment.

NVRmini 2:

- Panasonic WV-SW395 PTZ speed moving angle too much.

- Probe connection failed after several minute.

- Vivotek some PTZ models can’t control PTZ when PTZ speed is 0 in the camera web interface.

- EverFocus ONVIF camera responses LAN address in NAT environment.

Titan NVR:

- Panasonic WV-SW395 PTZ speed moving angle too much.

- Probe connection failed after several minute.

- Vivotek some PTZ models can’t control PTZ when PTZ speed is 0 in the camera web interface.

- EverFocus ONVIF camera responses LAN address in NAT environment.

1 2 3 4 5 6 7 ... 37 38

Brak uwag

EverFocus EPN4122 Instrukcja Użytkownika Strona 2