EverFocus EKB500 Instrukcja Obsługi

EKB500 DVR and Telemetry Keyboard FW 1.5New operating concept !

EKB500_ma_en_rev1.5_3.doc 10 In case the maximum number of 32 bus participants is exceeded, the number of connected devices can be increas

EKB500_ma_en_rev1.5_3.doc 115.2 EPTZ 500 / 1000 / 3000 / 3500 SPEED DOME CAMERA CONNECTION Applied protocol type: EVF2 (standard) 5.3 ED-220

EKB500_ma_en_rev1.5_3.doc 125.4 CONNECTION OF PELCO-D / -P PROTOCOL-COMPATIBLE DEVICES Basic functions of speed domes and telemetr

EKB500_ma_en_rev1.5_3.doc 135.5 EVERFOCUS DVR CONNECTION The EKB 500 keyboard can control the following digital video recorders: EDSR series (de

EKB500_ma_en_rev1.5_3.doc 14 System settings required for start-up: DVR: MENU > RS232/RS485: RS485 BAUD RATE 9600 BPS >

EKB500_ma_en_rev1.5_3.doc 15Keyboard Version 1.5 5.6 CONNECTION OF SEVERAL KEYBOARDS If several keyboards (max. 8) are used in a system, the RS-

EKB500_ma_en_rev1.5_3.doc 16COM Port Setting Device Setting 6 MENU SETTINGS After electrical installation and start-up, both the connected device

EKB500_ma_en_rev1.5_3.doc 17 6.2 COM PORT SETTING - RS-485 INTERFACE SETTING Define telemetry protocol type and transmission rate in this menu.

EKB500_ma_en_rev1.5_3.doc 18Monitor Name : _ _ _ Video Connected to DVR : _ _ _ Mon : _ _ Video Connected to DVR : _ _ _ CH : _ _ Monitor :

EKB500_ma_en_rev1.5_3.doc 19Total 005 Cameras [ ENT ] to view list Name RS485 DVR CH 012 2- 014 002 03 <Total 005 Monito

EKB500_ma_en_rev1.5_3.doc 21 SAFETY WARNINGS • Do not place the device near to heaters, furnaces, other heat sources or under direct solar irradi

EKB500_ma_en_rev1.5_3.doc 20Name DVR Mon 005 004 02 < Name RS485 004 1- 023 < Total 008 DVRs [ EN

EKB500_ma_en_rev1.5_3.doc 21This keyboard ID : 0 ( 0 – 7 , 0 for master ) Input new Password : _ _ _ _ _ _ _ _ Repeat Password : _ _ _ _ _ _ _ _

EKB500_ma_en_rev1.5_3.doc 22Release Joystick and press [ ENT ] Move joystick to corners. X+000 Y+000 Z+000 X-000 Y- OK Z-000 Bu

EKB500_ma_en_rev1.5_3.doc 23[ _ _ _ _ _ _ _ _ _ ] Pressed[ Esc ] to exit Shuttle : >>>> 5 Jog : 9934 Load default set

EKB500_ma_en_rev1.5_3.doc 24CAM - 001 MON - 01 ___ [ CAM / MON ] CAM - 001 MON - 04 > DVR ___ [ CAM / MON ] CAM - 001 MON -

EKB500_ma_en_rev1.5_3.doc 25CAM - 001 MON - 01 > DVR ___ [ CAM / MON ] 7.4 DVR PASSWORD INPUT If password protection is active in DVR,

EKB500_ma_en_rev1.5_3.doc 26The essential functions are described below; for further details please refer to the DVR manual. Please note that this

EKB500_ma_en_rev1.5_3.doc 277.6 PTZ OPERATION / SETUP The operation of speed domes and telemetry receivers requires the setup of these devices in

EKB500_ma_en_rev1.5_3.doc 28CAM : 0001 MON : 0001 [ CAM / MON / DVR ] 7.6.1 EverFocus EPTZ series The following functions are available after

EKB500_ma_en_rev1.5_3.doc 297.6.1.1 EPTZ on-screen display Start EPTZ menu: If DVR Main monitor is selected ("DVR" in LCD - dis

EKB500_ma_en_rev1.5_3.doc 3TABLE OF CONTENTS 1 SAFETY WARNINGS...

EKB500_ma_en_rev1.5_3.doc 30Back to home if no action for ___Minute Move to home position [ENT] to confirm Auto Back Enabled [↑↓] to toggle Speed:_

EKB500_ma_en_rev1.5_3.doc 317.6.1.5 Preset tours The EPTZ series supports up to 16 programmable preset tours with up to 16 presets each. For thes

EKB500_ma_en_rev1.5_3.doc 32Link Alarm:_ [1-4] to Position [↑↓]:___ Link Alarm:_ [1-4] to Tour [↑↓]:___ Del AlarmLink:_[1-4] [ENT] to confirm 7

EKB500_ma_en_rev1.5_3.doc 337.6.2 EverFocus ED 2200/2250, Samsung El. SCC-641/643/6405 operation Required protocol type in "COM PORT SETTINGS

EKB500_ma_en_rev1.5_3.doc 34Speed:___[1-239] [ENT] to start. 7.6.2.4 Autopan End stop definition Define both the end stops and the autopan speed

EKB500_ma_en_rev1.5_3.doc 35Speed:___[1-239] [ENT] to start. 7.6.3.2 Presets Save presets SSSHHHIIIFFFTTT (hold) + PPPOOOSSSIIITTTIIIOOONNN >

EKB500_ma_en_rev1.5_3.doc 367.6.3.5 Pattern / Preset Tour Define patterns, which also can contain a preset tour, in the speed dome’s on-screen disp

EKB500_ma_en_rev1.5_3.doc 378 SPECIFICATIONS Keys 48 Joystick 3-axis Display 2 lines with 20 characters each RS-485 2 independent RS-485 ports

EKB500_ma_en_rev1.5_3.doc 389 APPENDIX A: FACTORY SETTINGS PORT settings: Port 1: 9600 baud, EverFocus Port 2: 9600 baud, EverFocus DEVICE SETTIN

EKB500_ma_en_rev1.5_3.doc 39 Cam49: connected to DVR4, input1, PTZ-ID: OFF ... Cam64: connected to DVR4, input16, PTZ-ID: OFF Cam65: connected

EKB500_ma_en_rev1.5_3.doc 4

EKB500_ma_en_rev1.5_3.doc 40 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei,

EKB500_ma_en_rev1.5_3.doc 52 INTRODUCTION The EKB 500 universal keyboard was developed for both DVR remote control and telemetry control of speed

EKB500_ma_en_rev1.5_3.doc 62.4 DELIVERY SCOPE 1 x EKB-500 universal keyboard 1 x 12 VDC power supply 1 x RJ-45 connector, 120 Ohm terminated 1 x R

EKB500_ma_en_rev1.5_3.doc 73 OPERATING ELEMENTS 1. DVR, MON, CAM Operation mode toggle key: DDDVVVRRR: from firmware versi

EKB500_ma_en_rev1.5_3.doc 84 KEYBOARD CONNECTORS 4.1 RS-485 PORTS EKB-500 provides two independent RS-485 ports with 2 RJ-45 plugs each (loop-

EKB500_ma_en_rev1.5_3.doc 95 INSTALLATION 5.1 GENERAL RS-485 BUS INSTALLATION EKB 500 uses an RS-485 simplex wiring; the signal is transferred