EverFocus EDVR 16D1 Instrukcja Obsługi Pobierz pdf (Strona 42)

3232

3. LOG

YES: Select YES if you wish to record Motion Events log to the HDD.

NO: Select NO if you do not wish to record Motion Events log to the HDD.

4. DURATION

The amount of time a motion event will record - from 1 sec to 99 seconds. The default

value is 5 seconds. To change this, simply use the Jog Dial on the DVR.

5. ALARM OUTPUT

This will transmit a signal to another device. The setting of alarms are NONE = not

activated, 1 = output signal 1 transmits, 2 = output signal 2 transmits, 3 = output

signal 3 transmits and 4 = output signal 4 transmits. To change this, simply use the

Jog Dial on the DVR.

(Only EDVR16D3 model has 4 alarm outputs, all others have only 1 alarm output)

6. ALARM EMAIL

YES: Send an email when an alarm occurs.

NO: Do not send an email when an alarm occurs.

The email address and email server can be set in the NETWORK SETUP MENU.

7. ALARM NETWORK

YES: Enable alarm network when an alarm occurs.

NO: Disable alarm network when an alarm occurs.

8. BUZZER: Audible buzzer when motion is detected.

ENABLE: To enable a motion buzzer.

DISABLE: To disable a motion buzzer.

9. MOTION DELAY:

Select motion delay time from 0~7 level.

10. MAIN MON: Display on main monitor when motion occurs.

NO CHANGE: No change on the main monitor display when a motion occurs.

FULLSCREEN: A full screen of the active camera will display when motion occurs.

11. CALL MON: Display on a call monitor when motion occurs.

NO CHANGE: No change on the call monitor display when motion occurs.

ACTIVE CAMERA: Display the active camera that is set for Motion in full screen

mode to the call monitor.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 154 155

Brak uwag

EverFocus EDVR 16D1 Instrukcja Obsługi Strona 42