EverFocus EDSR100H Instrukcja Obsługi Pobierz pdf (Strona 35)

(6) FIELD CODE LINE : When the system is connected to the Multiplexer, it is used to adjust the field code

of the Multiplexer.

The values: 00~20

The default value is 13, it is suitable for most of the multiplexers.

If the field code line appears on the top of each playback channel, decrease the value.

If multiplexers can not playback properly ,increase the value.

(7) SYSTEM UPDATE :

YES/NO : Updates the system.

YES : Copy the update files into Compact Flash card ON PC and insert the

Compact Flash card into the slot, and then press ENTER key to

update system.

Notice: After the system is updated successfully, be sure reboot the system.

(8) LOAD DEFAULT :

YES/NO :

Load the Load System.

YES : The double check dialog will appear on the screen.

LOAD DEFAULT

NO YES

ENTER

Press key to NOT load default and Exit.

LOAD DEFAULT

NO YES

If not, press key to move the cursor to YES, and then press

key to load default.

(9) CF RENEW:

Two of modes for choice, YES or NO.

YES: will format CF card

NO: will not format CF card

(10) PLAY MODE :

Two of Modes for choice, FIELD or FRAME

ENTER

: Press or to move the cursor to the left or right.

Press or or Jog Dial to change the value.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 56 57

Brak uwag

EverFocus EDSR100H Instrukcja Obsługi Strona 35